Ariston TH 721 D22 B/LPG, Руководство пользователя

Страница: 13 / 20

12
Check the Seal
Once the appliance have been installed, make sure all the connections are properly sealed,
using a soapy water solution. Never use a flame.
How to load battery ( on those models fitted with battery box)
Open the battery box, and then place a 1.5V size “D” battery into the box.( take notice of the
direction)
Note:
a) "prior to installation, ensure that the local distribution conditions (nature of the gas and
gas pressure) and the adjustment of the appliance are compatible";
b) "the adjustment conditions for this appliance are stated on the label (or data plate)";
c) "this appliance is not connected to a combustion products evacuation device. It shall be
installed and connected in accordance with current installation regulations. Particular
attention shall be given to the relevant requirements regarding ventilation".
CAUTION: “In case of cooktop glass breakage: shut immediately off all burners and any
electrical heating element and isolate the appliance from the gas supply do not touch the
appliance surface, do not use the appliance.”
Burner cap placement instruction.
Please see below picture to set the burner cap groove to the arrow,make sure the burner cap
is placed well before cooking.
The appliance shall not be operated for more than 15 s. If after 15 s the burner has not lit,
stop operating the device and open the compartment door and/or wait at least 1 min before
attempting a further ignition of the burner.
In the event of the burner flames being accidentally extinguished, turn off the burner control and
do not attempt to re-ignite the burner for at least 1 min.