Ariston LFZ 3284 Скачать руководство пользователя страница 7

Страница: 7 / 40

Start-up and use

Starting the dishwasher

1. Turn the water tap on.

2. Press the

ON/OFF

button: you will hear a short beep; all the

indicator lights and the display will light up for a few seconds.

3. Open the door and pour in a suitable amount of detergent

(

see below

4. Load the racks (

see Loading the racks

) and shut the door.

5. Select the wash cycle in accordance with the type of

crockery and its soil level (

see Table of wash cycles

) by

pressing the

button.

6. Select the wash options

(

see adjacent information

7. Start the cycle by pressing the

Start/Pause

button: a long

beep signals the start of the wash cycle, the

washing

cycle

indicator light switches on and the time remaining until the end

of the cycle is displayed.

8. Two short beeps and one long one indicate the end of the

wash cycle; the wash cycle indicator light flashes and the

END

indicator light switches on (

fixed light

). Switch off the appliance

by pressing the

ON/OFF

button, shut off the water valve and

unplug the appliance from the electricity socket.

9. Wait for a few minutes before removing the crockery, in

order to avoid burns. Unload the racks, beginning with the
lower level.

The order in which the different wash cycles are

displayed will change according to the frequency with which

each cycle is used.

AUTO WASH CYCLES

: this model of dishwasher is

equipped with a special sensor which can be used to assess

the level of soiling and automatically select the most efficient

and economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the

operation of the sensor.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection

process it is possible to change the cycle, provided that it has

only just begun: once the wash cycle has started, switch off

the machine by pressing and holding the

ON/OFF/Reset

button. Switch it back on using the same button and select the
desired wash cycle and options.

Adding extra crockery

Press the

Start/Pause

button (the corresponding indicator

light will flash). Open the door, taking care to avoid the

escaping steam, and place the crockery inside the appliance.

Press the Start/Pause button (fixed light): the cycle will restart
after a prolonged beep is emitted.

If the Start/Pause button is pressed so as to pause the

machine, the wash cycle or the Delayed Start function (if
selected) is interrupted.
At this stage it is not possible to change the wash cycle.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a

power cut, the cycle stops. It starts again from the point at

which it was interrupted once the door has been shut or once
the electricity supply is restored.

Measuring out the detergent

A good wash result also depends on the correct amount

of detergent being used; exceeding the stated amount

does not result in a more effective wash and increases

environmental pollution.

Only use detergent which has been

specifically designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam

residue remaining in the machine after the cycle

has ended.

To achieve the best results from each washing

and drying cycle, powder detergent, rinse aid

liquid and salt should be used.

Compartment A:

Washing detergent

Compartment B:

Pre-wash detergent

1. Open cover C by pressing button
D.
2. Pour in the detergent after
consulting the

Table of wash cycles

For powder detergent use
compartments A and B.
For detergent in tablet form: when
the cycle requires 1 tablet, place it in
compartment A and close the cover;

when it requires 2, place the second tablet at the bottom of the
appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.

Wash options*

The

OPTIONS

may only be set, modified or reset after

the wash cycle has been selected and before the Start/
Pause button has been pressed.

Only the options which are compatible with the type of wash cycle
set may be selected. If an option is not compatible with the se-
lected wash cycle (

see Table of wash cycles

), the corresponding

LED flashes rapidly 3 times and 2 short beeps will sound.
If an option is selected which is incompatible with another (previ-
ously selected) option, the indicator light corresponding to the
option selected first will flash 3 times, 3 beeps will sound and it will
be deselected, while the most recently selected option will remain
active.
To deselect an option which has been set by mistake, press the
corresponding button again.