Ariston LFD 11S123 Скачать руководство пользователя страница 6

6

EN

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and 
the retaining elastic elements from the upper rack

 (if any).

Water softener settings

Before starting the first wash cycle, set the hardness lev-
el of 

the water from the mains supply. 

(see chapter Rinse 

aid and refined salt).

First load the softener tank with water, then introduce about 
1 kg of salt. It is perfectly normal for water to flow out.
As soon as this procedure is complete, run a wash cycle.
Only use salt that has been specifically designed for dish-
washers.
After the salt has been poured into the machine, the LOW 
SALT indicator light

*

 switches off.

If the salt container is not filled, the water softener and 

the heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm
height 85 cm
depth 60 cm

Capacity

15 standard place-settings

Water supply pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 psi – 145 psi

Power supply voltage

See appliance data plate

Total absorbed power

See appliance data plate

Fuse

See appliance data plate

This dishwasher conforms to the 
following European Community 
Directives: 
-2006/95/EC  (Low Voltage)
-2004/108/EC (Electromagnetic 
Compatibility) 
-2009/125/EC (Comm. Reg. 
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/CE  

 

Waste Electrical 

and Electronic Equipment (WEEE)

*

 Only available in selected models.

The control panel features a “Touch Control” system; 
press the symbols lightly with your fingertips to activate 
the command.

The machine has a buzzer/set of tones 

(depending  on  the 

dishwasher model

)

 to inform the user that a command has 

been implemented: power on, cycle end etc. 

The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed 

light 

(depending on the dishwasher model)

.

The display provides useful information concerning the type 
of wash cycle, drying/wash-cycle phase, remaining time, 
temperature etc etc.

Switching the appliance on for the first time

Selecting the language

Switch on the machine using the ON/OFF button and select the 

desired language using the buttons next to the grey arrows 

(the 

default language is English.) 

Press the OK button to confirm the selection.

Press the ESC button to exit or wait a few seconds.

 SETTINGS button

This button makes it possible to select: 

logo display, volume of buzzer/set of tones, language 
selection, rinse aid adjustment, water hardness adjustment, 
control panel lock.

Child safety lock

The control panel lock can be activated when the 

dishwasher is switched on or when a cycle is in progress using 

the “Lock” button. Press again to deactivate the function. 
Use the SETTINGS button to access the menu. The control panel 

lock can be activated automatically after 10/30 seconds from 
the cycle start. 

Содержание LFD 11S123

















Отзывы: