User’s manual
General warnings ........................................................3
Safety regulations ........................................................4
Control panel ...............................................................5
Battery insertion...........................................................5
Battery replacement ....................................................5
Ignition procedure ........................................................6
Appliance power adjustment
and water temperature adjustment
..............................6
Switching off procedure ...............................................6
Appliance shut-off conditions .......................................7
Anti-freeze protection ..................................................7
Maintenance ................................................................7
Dear Customer,
Thank you for choosing an ARISTON gas water heater.
We guarantee that your instantaneous water heater is
a reliable and technically sound product.
This manual provides detailed instructions and
recommendations for proper installation, use and
maintenance.
Remember to keep this manual in a safe place for
future reference i.e. by the gas meter.
Your local ARISTON Servicing Centre is at your
complete disposal for all requirements.
F OR Y OU R S AF E T Y
“Important: Read these instructions for use carefully so as to familiarize yourself with
the appliance before connecting it to its gas container. Keep these instructions for
future reference”.
IF YOU SMELL GAS:
* Turn off gas supply at bottle
* Extinguish all naked flames;
* Do not operate any electrical appliances
* Ventilate the area
* Check for leaks as detailed in this manual
If odour persists, contact your dealer or gas supplier immediately
Do not tamper or modify the appliance.
BURN-BACK (FIRE IN BURNER TUBE OR CHAMBER)
In the event of a burn-back, where the flame burns back to the jet, immediately turn the gas supply off
at the control valve on the panel. After ensuring the flame is extinguished, wait for I minute and re-
light the appliance in the normal manner. Should the appliance again burn back, close the control valve
and call a service technician. Do not use the appliance again until the service technician has declared
that it is safe to do so.
GAS-PRESSURE REGULATOR
This appliance requires an operating pressure of 2,8 kPa at the appliance. A suitable LPG regulator that
complies with the requirements of SANS 1237 must be installed.
IMPORTANT INFORMATION FOR THE USER
This appliance may only be installed by a registered SAQCC Gas installer
. All registered installers
are issued with a card carrying their registration number. Ask to be shown the card before allowing the
installation work to commence and make a note of the Installer registration number. Upon completion
of the installation, the installer is required to explain the operational details of the appliance together
with the safety instructions. You will be asked to sign acceptance of the installation and be provided
with a completion certificate. You should only sign for acceptance of the installation when the
installation is completed to your satisfaction.
Note that your invoice is required in the event that you wish make a guarantee claim.
IMPORTANT INFORMATION FOR THE INSTALLER.
This appliance may only be installed by a gas installer registered with the South African qualification
and certification committee (SAQCC). The appliance must be installed in accordance with the
requirements of SANS 10087-1for use with LPG, SANS 827 for use with NG and any fire department
regulations and/or local bylaws applicable to the area. If in doubt, check with the relevant authority
before undertaking the installation. Upon completion of the installation you are required to fully
explain and demonstrate to the user the operational details and safety practices applicable to the
appliance and the installation.