EN
3
1.
SETTING THE TIME
You will need to set the time when you switch on the
appliance for the first time: Press
until the
icon and the two digits for the hour start flashing on
the display.
Use
or
to set the hour and press
to confirm.
The two digits for the minutes will start flashing. Use
or
to set the minutes and press
to confirm.
Please note: When the
icon is flashing, for example
following lengthy power outages, you will need to reset the
time.
2.
REHEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 250 ° C for about one hour,
preferably using the “Maxi Cooking” function. The
oven must be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
USING THE APPLIANCE FOR THE FIRST TIME
1.
SELECT A FUNCTION
To select a function, turn the
selection knob
to the
symbol for the function you require: The display will
light up and an audible signal will sound.
2.
ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob
to set the temperature you require.
Please note: During cooking you can change the function
by turning the
selection knob
or adjust the temperature by
turning the
thermostat knob
.
The function will not start if the thermostat knob is on
.
You can set the cooking time, cooking end time (only if you
set a cooking time) and a timer.
AUTOMATIC
To start the automatic function you have selected
(“Bread” or “Dessert”), keep the
thermostat knob
at the
position for automatic functions (
).
To finish cooking, turn the
selection knob
to position 0.
Please note: You can set the cooking end time and timer.
RISING
To start the “Rising” function, turn the
thermostat
knob
to the relevant symbol; if the oven is set to a
different temperature, the function will not start.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3.
PREHEATING
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the
fixed icon
on the display will indicate that the oven
has reached the set temperature: At this point, place
the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.
DAILY USE
