background image

252584

•  Clean the appliance using warm water, liquid detergent, and a 

soft cloth.

•  Do not use any abrasive or sharp utensils or other objects. 

Burnt or dried food residues should be moistened using a 
damp cloth and softened with appropriate detergent. 

•  Stainless steel parts should be cleaned using special-purpose 

detergents. Use a dry, highly-absorbent cloth to apply a thin 
layer of detergent on a dry and cool surface, and rub gently in 
the direction of surface treatment pattern. Use a damp cloth 
and a detergent to clean stubborn stains; then, use a dry cloth 
to achieve to polish the surface until glossy. Do not use the 
same (stainless steel) detergents to clean aluminum parts.

•  Use warm water with some dishwashing detergent to clean the 

area around the cooking rings (or hotplates)

. Before doing 

so, use a sponge to soften any stubborn residues. 

• 

All dirty cooking zones

 should be cleaned thoroughly 

immediately after use. If the cooking zones are less stained, it 
suf

fi

 ces to wipe them with a damp cloth soaked in water and 

some detergent. If the hotplate is heavily soiled, use a steel 
sponge (wire scrubber) soaked with detergent. After cleaning, 
the cooking zones should always be wiped dry. 

•  Salt-containing liquids, dishes that have boiled over, or 

moisture, can damage the cooking zones. Therefore, always 
wipe the cooking zones clean and dry.

• To 

condition the cooking zones

, occasionally use some 

sewing machine oil, or conventional products for cleaning and 
care, available in the market. Never use butter, bacon / lard, 
or similar substance (risk of corrosion). If the cooking zone 
is slightly warm, the detergent will penetrate the pores more 
quickly. 

• 

Hotplate rings are made of stainless steel

; due to thermal 

load during cooking, they may discolor slightly to yellow. This 
phenomenon is a result of physical processes. Yellow spots 
can be restored by conventional metal cleaning detergents. Do 
not use aggressive utensils for cleaning the dishes, as these 
will scratch the rings.

Hotplates

Hotplates

7

Cleaning and maintenance

Содержание EVK4 Series

















Отзывы: