B
A
A
8mm
0.2-1 mm
2
A
C
C
A
16 - EN
Rigid or flexible wires with a 0.2 to 1 mm² cross-section can
be inserted in the terminal blocks for the serial connection.
If the wires have wire end ferrules with a plastic collar, the
maximum cross-section reduced to 0.75 mm².
For correct and safe connection, carry out the following
operations:
-
strip back the wires by 8mm as shown below;
-
if the cable is rigid the end of the wire can be inserted
easily, whereas with flexible cable it may be easier to
use a long pointed pair of pliers to insert correctly;
- push the wire completely in and check that it is
anchored by pulling it gently;
- to disconnect the cables, press the corresponding
white indent (ref. C) with a screwdriver and remove the
conductor.
Terminal connections -AB+ and CP
