42 /GB
WEB
BUS
A.P
.
WEB
BUS
A.P
.
DHW Settings
Connectivity Settings
CH Settings
Screen Settings
Serial Number
ON/OFF Wi-Fi Network
Factory data reset
Signal Level
Network configuration via AP
6. Follow Sensys's prompts, open the network settings of your internet device (smart-
phone, PC, Tablet...) and search for available Wi-Fi networks. Select the
Remote GW
Thermo
network. Now go to paragraph 5.2.
5.1.2 Configuration with the AP button
(as alternative to par. 5.1.1)
1. Hold down the AP button (for at least 5 seconds) until the WEB led
flashes green. After a maximum of 40 seconds, the gateway creates a
new WiFi network that remains active for 10 minutes, after which you will
need to repeat the procedure.
2. Open the network settings of your internet device (smartphone, PC, Tab-
let...) and select the
Remote Gw Thermo
network.
Now go to paragraph 5.2.