VERSION WITH 4 SPST ON-OFF RELAY OUTPUTS, CONTACTS POWERED
WARNING!
Before wiring the appliance be sure to turn the mains power off.
?
WARNING!
S1 (or ‘COL’)
S2
S3 and S4 are Pt1
temperature sensors. For S1 sensor the -5
u
C..+2
u
C range probe
(grey cable) must be used
while the probes with the range of -5
u
C..+11
u
C (blue cable) can be used for the other probes.
9
hen setting up installations with 2 solar panels
the probes corresponding to S1 and S4
must be exclusively of the
-50°C .. +200°C range type
. The relay outputs relative to 1
2
3
4 loads are powered (23
8`
); the output of the auxiliary
alarm relay is changeover type (SP
&
T) with voltage free contacts. It is advisable to
ſ
t a 1
A 25
8`
fuse on the power unit
mains capable to intervene in case of short circuits on loads.
IN ORDER TO CHECK THAT THE DEVICE IS WORKING CORRECTLY IT IS NECESSARY FOR THE LOADS TO BE CONNECTED.
TERMINAL
$
OAR
&
)
ROUN
&
IN
)
: On the base of the control unit case is located a brass terminal board for connecting the
ground protection conductors of the load devices connected to the control unit.
OUT 4
FUSE 10A
ALARM
OUT 1
OUT 2
OUT 3
230V~
±10%
50Hz