ARISTO-CRAFT TRAINS LIVE STEAM MIKADO 2-8-2, Инструкция по эксплуатации

Страница: 7 / 24

WWW.ARISTOCRAFT.COM 7
R/C System / Battery Charging Preparation
The very first step is to charge the NiC_d battery pack located inside the tender of the
locomotive. There is an included wall pack that must be plugged into a wall outlet first
and has a jack plug to insert into a hidden receptacle jack beneath the cylindrical coal
pusher on the top of the tender that unscrews
(See fig. #1).
First remove the decorative coal load on top of the tender, revealing the control panel
underneath it. Then move the leftmost slide switch with the tender facing away from you
to the “charger” position and then plug the charger lead into the battery charging con-
nection power jack as illustrated
(See fig. #2) .
The red indicator light located in front of the coal pusher will turn to orange for the
approximate five-hour charge time and then the light will go out after the charge is
complete. The first charge-up may take overnight, but will recharge faster the second
time.
After the LED light goes out, the charge is complete and you can begin the testing
phase of operation.
fig. #2
Inserting the plug
fig. #1
Receptacle jack location