ARISTEL NETWORKS
PTY. LTD
９００
Disable outgoing time limit. It is the default condition.
９１１
Disable end the call. NEOS will emit a reminder tone 30 seconds before the time as set,
but will not end the call.
９１２
Enable end the call. NEOS will emit a reminder tone 30 seconds before the time as set
and end the call at that time.
９０Ｘ
Set the time of an outgoing call.
Ｘ
is 1 to 9 minutes. The default is
３
minutes.
９６３
Disable the polarity reversal on answer for outgoing call. It is the default condition.
９６４
Enable the polarity reversal on answer for outgoing call.
９６７
Disable the polarity reversal on answer for incoming call. It is the default condition.
Time limit
&
call signal
９６８
Enable the polarity reversal on answer for incoming call.
９６０
Set the dial tone as
523Hz.
９６１
Set the dial tone as
400Hz
.
９６２
Set the dial tone as
350Hz+440Hz
.
It is the default condition.
９２７
Disable the false ring back tone. It will be silent without reminder tone (DU DU) and
false ring back tone.
９２８
Set the reminder tone (DU DU) after dialling.
９３３
Set the reminder tone (DU DU) then false ring back tone after dialling.
９３４
Set false ring back tone after dial. There is no reminding tone (DU DU). It is the default
condition.
９３９
Set the false ring back tone as
400Hz
.
９６９
Set the false ring back tone as
440Hz+480Hz
.
It is the default condition.
９２９
Set the reorder tone as
400Hz
after the call party ends the call.
Tone
frequency
９３０
Set the reorder tone as
480Hz+620Hz
after the call party ends the call. It is the default
condition.
９２５
Disable manual selection of the mobile trunk. It is the default condition.
９２６
Enable manual selection of the mobile trunk.
６１Ｘ＃
Set the access code of manually selecting the mobile trunk. X is 0 to 9 and
＊
. 9 is
default.
You can enable the selection of the mobile trunk by pressing 9 then dialling the number
when 926 is enabled and 619# is set.
Example: After enabling 926, dial
９０５０９１２３１２３
, it will call
０５０９１２３１２３
through the mobile trunk.
５７１
Disable automatically detecting PSTN line. NEOS assumes the PSTN line is connected
and the routing function is activated.
Router
selection
５７０
Enable automatically detecting PSTN line. NEOS detects if the PSTN line is connected.
５７３
Disable speed dialling through the phone book of SIM. It is the default condition.
５７４
Enable speed dialling through the phone book of SIM.
Speed dial
５２Ｘ
Set the speed dialling code. X is 0 to 9 and
＊
.
＊
is default.
Example: Set 574 and 52
＊
.
When you dial
＊
１０
NEOS will call using the 10th number
of the SIM card via the mobile trunk.
Model GW-NEOS-TC35A5-Q1 or later Operating manual Ver. 1.2 November 2005 page 6
