ARISTEL NETWORKS
PTY. LTD
Operating manual Ver. 1.1
Issued September 2006
page 3
Installation
1.
SIM card installation (Fig 1)
1.1
Remove the 12V adaptor from the CTM3000
1.2
Remove the SIM card cover from the bottom of the unit
1.3
Slide the SIM card holder towards the front of the unit
1.4
Lift up the holder
1.5
Insert the SIM card (Note orientation of notched corner)
1.6
Replace holder and slide towards the rear of the unit to lock in
place
1.7
Replace cover and power adaptor
2.
Connecting the Antenna (Fig 2)
2.1
Screw on the antenna cord to the connector on the front of the unit
2.2
Place antenna away from electrical/electronic systems (computers,
microwave ovens, etc)
3.
Connecting the Telephone line and Telephone system (Fig 2)
3.1
If connecting to a phone line, plug the line into the connector
marked LINE. Plug your telephone into the connector marked
PHONE. Go to step 3.3
3.2
If connecting to a phone system, plug the PBX CO line connection
into the connector marked PHONE.
3.3
Connect the power adaptor into the connector marked PWR
3.4
The red POWER indicator should be on.
