Arista W-118, Быстрый старт

Страница: 10 / 19

| 3 - W-118 Overview | 9
WAN Enables you to connect
the device to a wired
LAN through a switch or
a hub. The device can
then communicate with
the server. This port also
provides the power for the
device using the 802.3af
standard
RJ45 10/100/1000 Mbps Ethernet
Power over Ethernet
Bottom Panel of W-118
The bottom panel of W-118 and its corresponding ports are described below.
Figure: W-118 Bottom Panel
Port Description Connector Type Speed/Protocol
DC IN Enables you to connect
to and power on device
using 12 V DC power with 2
ampere.
5.5mm overall
diameter/2.1mm center pin/
hole
--
Pass-through port The pass-through port is
used to plug in a device into
another wired port that is
available on the wall where
the AP is installed. The
pass-through port at the
rear of the device and pass-
through port on the bottom
of the device are internally
connected.
RJ45 --
Ethernet (LAN3/PSE) Gigabit Ethernet port that
can be used for wired
extension for an SSID. This
port also provides the power
for the device using the
802.3af standard
RJ45 10/100/1000 Mbps Gigabit
Ethernet