O-105E | 3 - Access Point Overview | 5
Table 2. Labels: Side Panel LEDs
Label
Description
1
Power
2
2.4 GHz Radio
3
5 GHz Radio
4
LAN2
5
LAN1 (PoE)
Power LED: The following table describes the Power LED states.
Table 3. Power LED States Description
Green
Orange
Solid
Running at full capability
Running at reduced capability
Blinking
Received IP address, but not connected to the
server
Did not receive an IP address
Reduced capability indicates that the AP is getting lower than the required maximum power from the
PoE switch, i.e., 802.3af instead of 802.3at.
LAN1 LED: ON when the corresponding interface is up.
LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is
configured.
Radio LEDs: ON when the corresponding radio is operational.
Bottom Panel of O-105E
The bottom panel of the O-105E has LAN or PoE connectors that enable you to connect the device to
a wired LAN through a switch or a hub. The ports provide power for the device by using the 802.3at
standard.
Figure 3. O-105E Bottom Panel
