Arista DCS-7304, Быстрый старт

Страница: 22 / 58

18 Quick Start Guide: 7300 Series Modular Data Center Switches
Four-Post Rack Mount Chapter 3: Rack Mounting the Switch
3.2.3.3 Inserting the Switch into the Rack
Step 1 Rotate the stabilizer bar from the left shelf toward the right shelf such that the nob at the end
of the stabilizer bar inserts into the notch at the rear of the ledge of the right shelf.
Figure 3-11: Both Switch Shelves Installed
Step 2 Move the chassis to the rack using a mechanical lift ( Figure 3-12-right ).If modules are inserted
in the chassis, use the lift carefully to avoid damaging any components.
Figure 3-12: Lifting the Switch Chassis
Step 3 Lift the chassis into the rack.
Step 4 Secure the chassis by tightening the six thumbscrews on the front flanges into the rack posts.
After completing the Four-Post Installation, proceed to Chapter 4 .