Arista DCS-7050SX-128, Быстрый старт, Страница: 17 / 44

Chapter 3: Rack Mounting the Switch Four-Post Rack Mount
Quick Start Guide: 7000 Series 2 RU Data Center Switches 15
Step 2 Attach the slide end of the rail to the front post by extending the rail end past the post, then
contracting the rail while guiding the rack plugs into the post (
Figure 3-12, Inset B ).
Step 3 Repeat step 1 through step 2 for the left posts. Ensure the rails are on the same horizontal
level.
Figure 3-12: Attaching the Rails
3.2.5 Attaching the Switch to the Rack
After the rails are installed, the switch slides on the rails into the rack. Each bracket includes a thumb
screw that attaches the switch to the rail.
Step 1 Lift the switch into the rack and insert the mounting brackets into the slide rails.
Step 2 Slide the switch on the rails, toward the rear posts, until the mounting bracket flanges are flush
with the rail flanges attached to the rack posts.
Figure 3-13: Inserting the Switch onto the Rails