10
ARS-0202-A11
1
2 3
5 6
7
4
8
9
10
11
12
13
14
15
1. Gain knobs
- Gain knob for MIC IN1 and MIC IN2 audio channels.
Gain up: Turn the knob clockwise; Gain down: turn the knob anti-clockwise.
2. Delay Knob
- data transmission latency knob.
Latency up: turn the knob clockwise; Latency down: turn the knob anti-clockwise.
3. Latency display screen
- Displays latency time.
4. System LED
- Indicates the device’s system status.
Lights red: system is starting; Lights Green: system is ready.
5. SYNC LED
- Indicates the audio signal data transfer status.
Lights red: data transmission error; Lights Green: data is transmitting.
6. Phanto
m LED
- Phantom power indicator for microphone.
7. Power button
- Press to power on/off the ARS-0202-A11
Dante
TM
Audio Adapter.
8. Reset button
- Press to reset the unit to factory default.
9. DC Power input connector
- 12V/1A DC power input.
10. RJ-45/PoE LAN port
- For network connection and power supply, use RJ-45 or PoE LAN
cable to connect to network device.
11. MIC IN1/MIC IN2 connectors
- For microphone audio signal input.
12. LINE OUT1, LINE OUT2 ports
- Analog audio signal out to audio device(mixing con-
sole, speaker, headphone,amplifier etc.).
13. Power LED
- Lights blue: the Dante
TM
audio adapter is powered on.
14. Speed LED
- Lights blue: network bandwidth is 1Gbps, Off: network bandwidth is 100Mbps
15. Link LED
- Flashes blue: data is transmitting.
16. Rubber protection
16
Front
View
Rear
View
