Limited Warranty
The Arista Corporation warrants the
Arista 2-Channel Analog I/O Dante
TM
adapter
to be free from defects in the
material and workmanship for 2 years from the date of purchase from the Arista Corporation or an authorized dealer.
Should this product fail to be in good working order within 2 years warranty period, The Arista Corp., at its option, repair
or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized
modifications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the
unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied
warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges
to and from the Arista Corporation. Cables are limited to a 30 day warranty and cable must be free from any markings,
scratches, and neatly coiled.
The content of this user guide has been carefully checked and is believed to be accurate.
However, The Arista Corporation assumes no responsibility for any inaccuracies that may be contained in this user guide.
The Arista Corporation will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting
from any defect or omission in this user guide, even if advised of the possibility of such damages. Also, the technical
information contained herein regarding the product features and specifications is subject to change without further notice.
Model Name
ARS-0002-A00/ARS-0002-A01/ARS-0200-A00
Technical Information
Role of usage
Arista 2-Channel Analog I/O Dante
TM
adapter
Channel
2 Inputs(ARS-0200-A00), 2 Outputs(ARS-0002-A00/A01)
Supported network speed
100/1000Mpbs Ethernet
Sampling rates
44.1/48/88.2/96kHz
Bit depth
16,24,32 bit
Latency
Depending on the configuration on the device or network, 1 ms(default)
Ethernet connection
100BASE-TX(PoE support)
Input/Output impedance
Input impedance:6.6 kOhm(ARS-0200-A00)
Output impedance <800 Ohm(ARS-0002-A00/A01)
Input/Output level(balanced) Input level: Max.22 dBu(ARS-0200-A00)
Output level:Max.16 dBu(ARS-0002-A00/A01)
Frequency response
20 Hz to 20 kHz(+/- 0.5dB)
Dynamic range
> 100 dB
Signal-to-noise ratio
> 100 dB
THD + noise
< 0.01%(+ 4 dBu)
Crosstalk
< -80dB(20 kHz)
Interfaces and Buttons
Button(only ARS-0002-A01)
1 x UP button, 1 x DOWN button (for adjusting transmission latency)
Output
2 x Analog audio out connectors
Power connector
1x Micro USB port
Mechanical Information
Weight
170g
Dimension
4.92 x 1.30 x 1.10 inch/ 125 x 33 x 28 mm (L x W x H)
Power supply
5V DC Power input
Power consumption
2
Watts
Operation temperature
0~50
O
C [32~122F]
Storage temperature
-20~60
O
C [-4~140F]
Relative humidity
20~90% RH [no condensation]
6
Product Specifications
© Copyright 2017
The information contained in this user guide and all accompanying documentation is copyrighted and all rights are
reserved. This publication may not, in whole or in part, be reproduced, transcribed, stored in a retrieval system, translated
into any language or computer language, or transmitted in any form whatsoever without the prior written consent from
the manufacturer, except for copies retained by the purchasers for their personal archival purposes. The manufacturer
reserves the right to revise this user guide and all accompanying documentation and to make changes in the content
without obligation to notify any person or organization of the revision or change.
IN NO EVENT WILL THE VENDOR BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT OR
DOCUMENTATION; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE
VENDOR SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH
THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
All trademarks mentioned in this document are acknowledged. The specifications in this user guide are subject to change
without notice.
7
Product Safety Precautions
Read all of these instructions and save this user guide for later use. Follow all warnings and instructions on
the product.
•
Relative humidity: 25%~80%, storage temperature: -20
o
C to 60
o
C(-4F to 140F), operation temperature:
0~50
o
C(32F to 122F)
• Do not install the unit near heat sources or an open fire. The unit environment should be well-
ventilated.
• Never immerse in water. Do not expose this product to strong sunlight, Do not place heavy objects on
the unit.
• If disruptions occur during operation:Immediately disconnect the Arista Dante
TM
adapter from audio
sources and/or audio sinks.
• Use only the power cord supplied with the unit. In the event that another power cord is used, one that is
different than the one provided by the supplier, make sure that it is certified by the local and applicable
national standards.
• If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair
service provider for a replacement.
•
The power supply cord is used as the main disconnect device. Ensure that the socket outlet is easily
accessible after installation.
•
Overloaded AC outlets, extension cords, frayed power cords, and broken plugs are extremely
dangerous. They may, and can, result in an electrical shock or fire hazard. Call an authorized service
technician for any replacements.
•
Hands must be dry when plugging the power cord into an AC outlet to prevent electrical shock. Do not
damage the power cord by disassembling, bending, pulling or exposing it to heat as it may cause a fire
or electrical shock.
•
Make sure to completely insert the power plug into an AC outlet. Insecure connections can cause a fire.
• Ensure that the power source is grounded correctly.
• Unplug the Arista 2-Channel Analog I/O Dante
TM
adapter if cleaning is needed. The unit may be wiped
with a dry or slightly damp cloth when the power is off.
• Unplug the unit when not in use for an extended period of time.
• Consult a service technician if the Arista 2-Channel Analog I/O Dante
TM
adapter does not operate
normally when you have followed the instructions in this user guide.
•
Do not attempt to repair this product yourself. Always get a qualified service technician to carry out
adjustments or repairs.
5
Troubleshooting
Before requesting service for the Arista 2-Channel analog In/Out Dante
TM
adapter
, check the
following for a possible cause of the problem you are experiencing. Some simple checkups or
a minor adjustment on the adapter may eliminate the problem and restore to normal operation.
No power
• Insert the power plug properly into the power outlet.
•
Check if the ON/OFF button on the audio device is set to “on”.
•
Check if your router is with PoE support.
No signal on the unit
•
Check if all the cables are connected correctly.Physically disconnect and reconnect the device.
•
Check if your audio system is turned on.
• For software audio source, restart the audio application and play some audio in the audio application.
No Audio on the destination device
•
Check that the device is actually routed to a destination audio device.
•
Check that the destination is succesfully connected to Arista analog I/O adapter (as its audio input) .
•
Check that the destination is capable of receiving and/or playing audio.
•
Check that the volume level is not adjusted to low, turn up the volume.
The audio signal is distorted
•
Check if the connectors are in good condition.
•
Disable any Wi-Fi network connections.
•
Check that any network switches in the system are coping with their traffic.
• Faulty LAN cable, replace with a good one.
No network connection
•
Check if all the connection cable on the LAN ports are connected properly.
•
Check if the router connected to LAN port work in normal.
20190911_V 1.3
