22
Clearing CMOS data
As shown in the figure below, this jumper allows you to erase CMOS data and reset setting
to factory default.
Normally this jumper should be set with pins 1-2 closed.
If you want to reset the CMOS data, set the Clear CMOS jumper to 2-3 closed for just a
few seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS data to its default settings.
Note:
Before the operation, please power off the motherboard and unplug the power cord.
1
2
3
Clear CMOS jumper
Description
Pin setting
Keep CMOS data(Normal)
Pin1-2 Closed(Default)
Clear CMOS data
Pin2-3 Closed
