Arista 7020SR-32C2 Series, Быстрый старт

Страница: 16 / 42

Note: The rail clip prevents the extension of the rail beyond the maximum supported
distance between the front and rear rack posts.
Figure 6: Assembling the Rails
1 Rail Slide 3 Rail (assembled)
2 Rail Rod A Rack Plugs
2. Attach rail to the right rear rack post by inserting rod-end rack plugs into post slots ( Figure 7:
Attaching the Rails ). The slide assembly must be inside the right posts, relative to the left rack
posts.
Note: If the rack plugs were previously removed, use bolts to attach the rail to the rack.
3. Attach the slide end of the rail to the front post by extending the rail end past the post, then
contracting the rail while guiding the rack plugs into the post ( Figure 7: Attaching the Rails ).
4. Repeat Step 1 through Step 3 for the left posts. Ensure the rails are on the same horizontal level.
Figure 7: Attaching the Rails
12