ARIMA SW350 Скачать руководство пользователя | Manualshive

Страница: 4 / 50

background image

3

Legal Disclaimer

The information provided in this document is subject to change without notice.
Arima Computer Corp. makes no warranty regarding this document.
Always read the safety instructions carefully.

Arima Computer Corp. cannot anticipate all of your working conditions; for safety, you should use caution,
care and good judgment when following the procedures described in this material. Arima Computer Corp.
shall not be liable for errors contained in this material nor any damage incurred in the use of this material.

Arima Computer Corp. assumes no responsibility for any damage to property, injury to persons, or losses
incurred as a result of misuse of the information provided.
Arima Computer Corp. assumes no responsibility for the reliability of its software on equipments that are
not manufactured by Arima Computer Corp..

Copyright Notice

This document contains proprietary information that is protected by copyright. All rights are reserved. No
part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any
language or computer language, or transmitted in any form whatsoever without the prior written consent of
Arima Computer Corp.. We reserve the right to make changes to this document without notice.

Copyright

©

2006 by Arima Computer Corp.. All rights reserved.

Other products and companies referred to herein are the trademarks or registered trademarks of their
respective companies or mark-holders.

Opteron

TM

is registered trademarks of AMD Corporation.

ServerWorks

TM

is registered trademarks of Broadcom Corporation.

Windows® 98/2000/NT/XP are registered trademarks of Microsoft Corporation.

Revision Version: 1.

1

Release Date: November 2006

Technical Support

If a problem arises with your system during installation or operation and is unable to be resolved from the
user manual, consult the following list of resources for help:

Contact the place of purchase for help. This is the recommended solution as they can provide the
quickest assistance.

Visit Arima Computer Corp. website for up to the minute FAQ, guides and updates. The website can
be found at:

http://www.arima.com.tw/server

Or contact our support staff at:

[email protected]

«
...
2
3
4
5
6
...
»

Содержание SW350



















































Отзывы:

Нет отзывов

Похожие инструкции для SW350

Side-Power SEP IP Series

Бренд: SLEIPNER MOTOR AS Страницы: 28

RHINO VAP133-ACP

Бренд: Octek Страницы: 66

Бренд: Atmel Страницы: 23

GeForce 8300 (MI-A78U-8309)

Бренд: XFX Страницы: 26

Бренд: DTK Страницы: 50

Бренд: Renesas Страницы: 20

A20-OLINUXINO-LIME

Бренд: OLIMEX Страницы: 49

Бренд: Humandata Страницы: 10

Бренд: IEI Technology Страницы: 198

Бренд: ITX SECURITY Страницы: 18

Бренд: Aura Light Страницы: 8

Бренд: Supero Страницы: 105

Бренд: Gigabyte Страницы: 72

BD7F100EFJ-EVK-002

Бренд: Rohm Страницы: 6

GPS Evaluation Board

Бренд: Round Solutions Страницы: 7

Бренд: BCM Advanced Research Страницы: 72

Бренд: Ublox Страницы: 18

Бренд: ECS Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды