4
show the ambient humidity.(Press once again can show the
turning-off time.)
4. HUMIDITY SETTING
●
Press the key to set the relative humidity you need. (From
continuous dehumidification [CO] to relative humidity 30%,35%, 40%,
45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, comfort
mode [AU], and back to continuous dehumidification [CO]. The first
time you electrify the unit, the unit is set to be continuous
dehumidification [CO].
●
When ambient humidity is lower than setting humidity by 3%,
compressor will stop automatically, and return working until the
ambient humidity is higher than setting humidity by 3%.
COMFORT MODE [AU]
a. When ambient temperature is lower than 5
℃
, compressor will stop
working.
b. When ambient temperature is higher than 5
℃
and lower than 20
℃
,
the product will set the humidity to 60% automatically.
c. When ambient temperature is higher than 20
℃
and lower than
27
℃
, the product will set the humidity to 55% automatically.
d. When ambient temperature is higher than 27
℃
, the product will set
the humidity to 50% automatically.
WATER FULL
When the water tank is full, the indicating light will illuminate and the unit
will stop working until empty the water tank.
DEFROST
When the unit is defrosting, the indicating light will illuminate and the
compressor will stop working but the motor will keep operating.
5
WARNING
1. When operating the dehumidifier, please do not set the humidity higher
than ambient humidity.
2. When indicating light illuminates, please pour the water out of the tank
and put it back. Then the product will resume working.
3. When the product shut down, please wait at least 3 minutes before
restarting the unit to prevent damaging the compressor.
4. The applicable operating temperature range for this unit is 5-32 .
℃
5. If the dehumidifier can’t start (the indicating light does not illuminate) or
the dehumidifier shut down unreasonably, please make sure whether
the plug is connected firmly to power supply. If the plug and power
supply are in normal condition, please wait for 10 minutes before restart
the unit (because it takes 10 minutes to reposition). If the unit still does
not start after 10 minutes, please ask your local distributor service
station to repair.
6. When the dehumidifier is operating, it’s a normal situation that the
working compressor may cause some heat and bring the ambient
temperature up.
7. When the product is defrosting, the related indicating light will
illuminate.
8. The unit shows the ambient humidity when it’s operating. If the ambient
humidity is higher than RH95%, the display shows “HI”; if the ambient
humidity is lower than RH30%, the display shows “LO”
