Use
And Care Instructions
Metal grease filter maintenance
The metal filter traps grease released by foods on the cooktop. The filter must always be installed when the hood is
operating / used.
To remove:
•
Push the filter lock / pivot in direction to the center of the filter.
•
Once the pivot is pushed pull down the filter slowly.
To replace:
•
Insert the filter tabs into the slots
•
Push the filter lock / pivot in direction to the center of the filter.
•
Once the pivot is pushed, raise the filter slowly until the top and
release the pivot.
To clean:
•
Swish the filter in hot soapy water and rinse in clean
water or wash it in the dish washer.
•
Do not use abrasive cleaners.
hood maintenance
•
Clean with a damp, soapy cloth and dry with a clean cloth. A glass cleaner may also be used.
ATTENTION:
Do not wet the control panel.
•
Do not use a steel wool pad; it will scratch the surface.
•
To clean the stainless steel surface, use warm sudsy water, stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless
steel surface.
Lamp bulb maintenance
•
Use a Phillips # 2 screw driver to remove the lamp cover. Remove it carefully
from its housing.
•
Remove the damaged lamp bulb (turn counter clockwise) and replace it
with a new bulb. E12 Philips Lamp 120V, 40W.
Содержание DKW001MX 30
Страница 10: ...10 Installation Instructions ...
Страница 36: ...36 Instrucciones para la Instalación ...