ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
S224054-2-INS-RA
•
PAGE 2
Step 1
Starting on the driver side, locate the six
mounting locations along the inside of the
rocker panel. Each location will have two
threaded holes directly above / below one
another with a plastic cover.
Step 3
Carefully place the side bar onto the
mounting brackets and align all mounting
locations on the bottom of the side bar with
the mounting brackets. Secure the side bar
to the brackets using six M10 hex bolts,
flat washers and lock washers.
Step 2
Remove the plastic covers from the threaded
holes at the front mounting location. Attach the
bracket to the body panel using two M8 hex
bolts, lock washers and flat washers.
Repeat this step for the remaining
two brackets on the driver side.
Snug the hardware,
but do not fully tighten.
Repeat steps 1 through 2
on the passenger side.
