Ariens Zoom 1844 XL Скачать руководство пользователя страница 3

GB-3

5. Explain recommended lubrication and maintenance. 

Advise customer on adjustments. Instruct customer on 
controls and operation of unit. Discuss and emphasize the 
Safety Precautions. Give customer Owner/Operator, Parts, 
and Engine Manuals. Advise customer to thoroughly read 
and understand them.

Customer Note: Your Dealer has been provided complete set-up 
and preparation instructions which must be completed prior to 
you taking delivery of this unit. The dealer is required to review 
important information in this manual with you before or upon 
delivery of the unit or attachment.

SAFETY ALERT SYMBOL

These are safety alert symbols. They mean: 

ATTENTION

YOUR SAFETY IS INVOLVED! 

 When you see this symbol:

BECOME ALERT! 

•OBEY THE MESSAGE!

SIGNAL WORDS

The safety alert symbols above and signal words below are used 
on decals and in this manual.

Read and understand all safety messages.

NOTATIONS

NOTE: General reference information for proper operation and 
maintenance practices.

IMPORTANT: Specific procedures or information required to 
prevent damage to unit or attachment.

PRACTICES AND LAWS

Practice usual and customary safe working precautions, for the 
benefit of yourself and others. Understand and follow all safety 
messages. Be alert to unsafe conditions and the possibility of 
minor, moderate, or serious injury or death. Learn applicable 
rules and laws in your area, including those that may restrict the 
age of the operator.

REQUIRED OPERATOR TRAINING

Original purchaser of this unit was instructed by the seller on safe 
and proper operation. If unit is to be used by someone other than 
original purchaser (loaned, rented or sold), ALWAYS provide this 
manual and any needed safety training before operation.

SAFETY

WARNING: This cutting machine is capable of 
amputating hands and feet and throwing objects. 
Failure to observe the safety instructions in the 
manuals and on decals could result in serious injury or 
death.

Slopes are a major factor related to loss-of-control and 
tip-over accidents. Operation on all slopes requires 
extra caution.

Tragic accidents can occur if the operator is not alert to 
the presence of children. Never assume that children 
will remain where you last saw them.

Gasoline is extremely flammable and the vapors are 
explosive, handle with care.

Disengage attachment, stop unit and engine, remove 
key, engage parking brake, and allow moving parts to 
stop before leaving operator’s position.

OL1253

OL3900

DANGER: IMMINENTLY HAZARDOUS SITUATION! If 
not avoided, WILL RESULT in death or serious injury.

WARNING: POTENTIALLY HAZARDOUS 
SITUATION! If not avoided, COULD RESULT in death 
or serious injury.

CAUTION: POTENTIALLY HAZARDOUS SITUATION! 
If not avoided, MAY RESULT in minor or moderate 
injury. It may also be used to alert against unsafe 
practices.

Содержание Zoom 1844 XL

























Отзывы: