Ariens Pro 28 EFI CE, Руководство по обслуживанию, Страница: 27 / 84

EN – 26
Install Transaxle
1. Install key, pinion sprocket and spacer bushing onto
transaxle driveshaft. Secure with E-ring.
See Figure 50.
2.
Position transaxle inside unit and install chain around
pinion sprocket.
3. Level transaxle and align with transaxle mount.
Support transaxle, but DO NOT reinstall mounting
hardware.
IMPORTANT:
Each side of chain should have an equal
amount of links / tension between pinion sprocket and
pinion gear. If tension is uneven, manually turn pinion gear
toward side with greater tension until equal.
See Figure 51.
4.
Reinstall shift rod into transaxle and bell crank.
IMPORTANT:
Shift rod ends are not equal length. The long
end inserts through transaxle, and the short end inserts
through bell crank.
5.
Secure shift rod to transaxle with one flat steel washer
and hairpin. Secure shift rod to bell crank with one
hairpin.
Figure 50
Figure 51