background image

EN - 3

DELIVERY

Customer Note:

 If this product was 

purchased without complete assembly and 
instruction by a retailer, it is your 
responsibility to:

Read and understand all instructions 

in this manual. If you do not 

understand or have difficulty following 

the instructions, contact your nearest 

Ariens Dealer for assistance. 

NOTE: 

To locate your nearest Ariens Dealer, 

go to www.ariens.com.

Before Operating Unit:

1. Make sure all assembly has been 

properly completed.

2. Understand all Safety Precautions 

provided in the manuals.

3. Review control functions and operation 

of the unit. Do not operate the unit 

unless all controls function as described 

in this manual.

4. Review recommended maintenance and 

adjustments.

5. Review Limited Warranty policy.
6. Fill out a product registration card and 

return it to Ariens Company or register 

the product at www.ariens.com.

DISCLAIMER 

Ariens reserves the right to discontinue, 
change and improve its products at any time 
without notice or obligation to the purchaser. 
The descriptions and specifications contained 
in this manual were in effect at printing. 
Equipment described within this manual may 
be optional. Some illustrations may not be 
applicable to your unit.

WARNING: 

Improper assembly or 

adjustments can cause serious 

injury.

Содержание Path-Pro 136

























Отзывы: