Ariens Gravely 985114 Скачать руководство пользователя страница 7

 

GB - 7

DO NOT touch unit parts which might be hot from 
operation. Allow parts to cool before attempting to 
maintain, adjust or service.

NEVER place your hands or any part of your body or 
clothing inside or near any moving part while unit is 
running.

DO NOT wear loose clothing or jewelry. Tie back hair that 
may get caught in rotating parts.

Keep children and people away from unit during 
operation.

Fumes from engine exhaust can cause injury or death.

DO NOT run engine in an enclosed area. Always provide 
good ventilation.

Thrown objects can cause injury and property damage. 
DO NOT point discharge at anyone or discharge directly 
onto paved or gravel surfaces. 

Always stand clear of the discharge area when operating 
this unit.

Read, understand, and follow all instructions in the 
manual and on the machine before starting.

Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

Braking and steering characteristics

Turning radius and clearance

ALWAYS keep protective structures, guards, and panels 
in good repair, in place and securely fastened.
NEVER modify or remove safety devices.
ALWAYS keep discharge cover or complete grass 
catcher in place and in proper working condition.
Check steering control operation frequently. Adjust and 
service as required.
Safety Interlock System must function properly. DO NOT 
operate unit if operator presence control is damaged or 
disabled.

If equipment vibrates abnormally, stop engine at once, 
disengage PTO, wait for all moving parts to stop, and 
remove key. Check for any damage or loose parts. Repair 
before restart.

Before starting engine: disengage PTO and place unit in 
neutral.

DO NOT operate at too fast a rate. DO NOT change 
engine governor settings or over-speed engine. Slow 
down and turn corners slowly.

Disengage PTO when attachment is not in use. ALWAYS 
turn off power to attachment when travelling, crossing 
driveways, etc.

Avoid uneven and rough terrain. DO NOT operate near 
drop offs, ditches, or embankments. Unit can suddenly 
turn over if a wheel is over the edge of a cliff or ditch, or if 
an edge caves in. 

DO NOT try to stabilize unit by putting foot on ground 
when operating with applicable riding attachments.

When engine is running and speed control lever is 
forward, holding only one steering lever will cause unit to 
circle around one drive wheel.

Use care when approaching blind corners, shrubs, trees 
or other objects that may obscure view.

ALWAYS disengage PTO, stop unit and engine, remove 
key and allow moving parts to stop before leaving 
operator’s position.

Never leave a running unit unattended. ALWAYS shut off 
engine before leaving unit.

ALWAYS remove key to prevent unauthorized use.

DO NOT operate in reverse unless absolutely necessary. 
ALWAYS backup slowly. ALWAYS look down and behind, 
before and while backing.

DO NOT operate on steep slopes. DO NOT operate on 
slopes of more than 10°. Operate across the face of 
slopes, not up and down.

Turf conditions can affect the unit’s stability.

Keep all movement on slopes slow and gradual. DO NOT 
make sudden changes in speed or direction. Use a slow 
speed to avoid stopping or shifting on slopes. Avoid 
starting or stopping on a slope.

DO NOT park unit on a slope unless absolutely 
necessary. When parking on a slope always chock or 
block wheels.

Use extra care when loading or unloading unit onto trailer 
or truck.
Secure unit chassis to transport vehicle. NEVER secure 
from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.

Keep unit free of grass, leaves, or other debris. Clean up 
oil or fuel spills.

This product is equipped with an internal combustion 
engine. DO NOT use on or near any unimproved, forest 
covered or brush covered land unless the exhaust 
system is equipped with a spark arrester meeting 
applicable local, state or federal laws. A spark arrester, if 
used, must be maintained in effective working order by 
the operator.

Fuel is highly flammable and its vapors are explosive. 
Handle with care. Use an approved fuel container.

No smoking, No sparks, No flames. ALWAYS allow 
engine to cool before servicing.

NEVER fill fuel tank when engine is running or hot from 
operation.

NEVER fill or drain fuel tank indoors.

Replace fuel cap securely and clean up spilled fuel.

Never fill containers inside a vehicle or on a truck or 
trailer bed with a plastic liner. Always place containers on 
the ground away from your vehicle before filling.

When practical, remove gas-powered equipment from 
the truck or trailer and refuel it on the ground. If this is not 
possible, then refuel such equipment on a trailer with a 
portable container, rather than from a gasoline dispenser 
nozzle.

Содержание Gravely 985114

























Отзывы: