background image

 

3

 

IMPORTANT: 

 

This cutting machine is capable of 

amputating hands and feet and throwing objects. 
Failure to observe the following safety instructions 
could result in serious injury or death.

Look for this symbol to point out important 
safety precautions. It means:

 

Become Alert! 

YOUR SAFETY IS INVOLVED.

OBEY THE  MESSAGE!

 

The safety alert symbol is used in decals on the unit, 
and with proper operation and procedures in this 
manual.

Understand the safety message. It contains important 
information about personal safety on or near the unit. 

 

NOTATIONS

 

NOTE: 

 

General reference information for proper opera-

tion and maintenance practices.

 

IMPORTANT: 

 

Specific procedures or information 

required to prevent damage to unit or attachment.

 

PRACTICES AND LAWS

 

Practice usual and customary safe working 
precautions, for the benefit of yourself and others. 
Understand and follow all safety messages. Be alert to 
unsafe conditions and the possibility of minor, 
moderate, or serious injury or death. Learn applicable 
rules and laws in your area.

 

REQUIRED OPERATOR TRAINING

 

Original purchaser of this unit was instructed by the 
seller on safe and proper operation. If unit is to be used 
by someone other than original purchaser; loaned, 
rented or sold, ALWAYS provide this manual and any 
needed safety training before operation.

 

SAFETY DECALS AND LOCATIONS

 

ALWAYS replace missing or damaged Safety Decals. 
Read, understand and follow safety decals on tractor 
and bagger prior to operation.

 

DANGER: 

 

IMMINENTLY HAZARDOUS 

SITUATION! If not avoided, WILL RESULT in 
death or serious injury. 

 

WARNING: 

 

POTENTIALLY HAZARDOUS 

SITUATION! If not avoided, COULD RESULT 
in death or serious injury. 

 

CAUTION: 

 

POTENTIALLY HAZARDOUS 

SITUATION! If not avoided, MAY RESULT in 
minor or moderate injury. It may also be used 
to alert against unsafe practices.

WARNING

LOSS OF CONTROL
MAY RESULT

OBJECTS MAY BE
THROWN

Tipover or complete loss
of steering may result
from a combination of
excessive bagger load,
operation on slopes and
abrupt turns or speed
changes.

Front weight is required
when using bagger.

Stop blade rotation
(Mower Clutch Out) before
opening cover.

• Check bagger components

for structural damage,
wear or deterioration
before each usage.
Replace only with  original
service parts.

CAU TION

STOP ENGINE BEFORE
REMOVING TUBE, BOOT
OR PLACING HAND INSIDE.
DO NOT RUN MOWER
WITHOUT COMPLETE TUBE
AND CATCHER IN PLACE.

078977A

OEe0461

 

SAFETY

 

2. Understand all Safety Precautions provided in the 

manuals.

3. Review control functions and operation of the 

unit.

4. Review recommended lubrication, maintenance 

and adjustments.

5. Review Limited Warranty Policy.

6. Fill out Original Purchaser Registration Card and 

return the card to Ariens Company.

To locate your nearest Ariens Dealer, call  1-800-678-
5443 or connect to www.ariens.com.

 

DISCLAIMER

 

Ariens reserves the right to discontinue, make changes 
to, and add improvements upon its products at any time 

Содержание EZRider 815005






















Отзывы: