Ariens 920025, Руководство по обслуживанию, Страница: 18 / 60

EN – 14
3. Align swing gate tab with stop hole in frame and insert
pivot rod through support bushing. See Figure 21.
See Figure 22.
4.
Reinstall support bushing onto swing gate pivot rod.
5. Reinstall spring clip into pivot rod.
NOTICE: Support bushing MUST be correctly seated in
and flush with frame.
6.
Reinstall swing gate spacer, align with support
bushing and secure with 2 tapping screws.
See Figure 23.
7.
Reconnect idler spring to traction drive idler.
8. Reconnect swing gate return spring to frame.
9. Reinstall housing to frame. See Reinstall Auger
Housing on page 9.
10. Adjust traction drive clutch. Refer to Operator’s
Manual for adjustment procedure.
11. Reconnect spark plug wire.
IMPORTANT: Check all adjustments after first use.
Figure 21
1. Swing Gate Tab
2. Support Bushing
1
2
Figure 22
1. Support Bushing
2. Swing Gate Spacer
1
2
Figure 23