Ariens 915131 - 1334 Скачать руководство пользователя страница 7

GB - 7

ALWAYS remove key from ignition and wire 
from spark plug before assembly, or working 
on this unit.

Inspect unit before each use for: missing or 
damaged decals and shields, correctly 
operating safety interlock system, and 
deterioration of grass catchers. Replace or 
repair as needed.

ALWAYS check overhead and side 
clearances carefully before operation. 
ALWAYS be aware of traffic when crossing or 
operating along streets or curbs.
Keep children, people, and pets away. Be 
alert and shut off unit if anyone enters work 
area. Keep children under watchful care of a 
responsible adult.

NEVER allow children to operate or play on 
or near unit.

Keep area of operation clear of all toys, and 
debris. Thrown objects can cause injury.
Stay alert for hidden hazards, holes, and ruts.

Avoid uneven or rough terrain. DO NOT 
operate near drop-offs, ditches, or 
embankments. Unit can suddenly turn over if 
a wheel is over the edge of a cliff or ditch, or if 
an edge caves in.

Dust, fog, etc. can reduce vision and cause 
an accident. Operate unit only when there is 
good visibility and light.
Data indicates that operators, age 60 and 
above, are involved in a larger percentage of 
riding mower related injuries. These 
operators should evaluate their ability to 
operate the riding mower safely enough to 
protect themselves and others from serious 
injury.

Only trained adults may operate unit. Training 
includes being familiar with controls and 
actual operation.

NEVER operate unit after or during the use of 
medication, drugs or alcohol. 
NEVER allow anyone to operate this unit 
when their alertness or coordination is 
impaired.

Wear adequate safety gear, sturdy shoes, 
and protective gloves. 

DO NOT wear loose clothing or jewelry and 
tie back hair that may get caught in rotating 
parts.
Protect eyes, face and head from objects that 
may be thrown from unit. Wear appropriate 
hearing protection. Always wear safety 
goggles or safety glasses with side shields 
when operating mower. 
Avoid sharp edges. Sharp edges can cut. 
Moving parts can cut off fingers or a hand.

ALWAYS keep hands and feet away from all 
rotating parts during operation. Rotating parts 
can cut off body parts.

ALWAYS keep hands away from all pinch 
points.

Start and operate unit only when seated in 
operator’s position. Steering control levers 
must be in neutral, PTO disengaged and 
parking brake set when starting engine.
ALWAYS keep body and hands away from 
pin holes or nozzles which eject hydraulic 
fluid under pressure.

DO NOT touch unit parts which might be hot 
from operation. Allow parts to cool before 
attempting to maintain, adjust or service. 

NEVER place your hands or any part of your 
body or clothing inside or near any moving 
part while unit is running.
NEVER direct discharge towards persons or 
property. Thrown objects may ricochet back 
towards operator. ALWAYS stand clear of the 
discharge area. 

ALWAYS disengage attachment, stop unit 
and engine, remove key, engage parking 
brake, and allow moving parts to stop before 
leaving operator’s position.

Use extreme caution on gravel surfaces. 
Disengage PTO when attachment is not in 
use and when crossing gravel surfaces.

DO NOT operate unit if safety interlock 
system is damaged or disabled. Check safety 
interlock before each use.

ALWAYS remove key to prevent unauthorized 
use.
DO NOT operate at too fast a rate. Slow 
down before turning.

Stop engine before removing grass catcher or 
unclogging chute.

DO NOT mow on wet grass. Reduced 
traction could cause sliding.
DO NOT try to stabilize the machine by 
putting your foot on the ground.

Know the weight of loads. Limit loads to those 
you can safely control and the unit can safely 
handle.

ALWAYS keep protective structures, guards 
and panels in good repair, in place and 
securely fastened.
Do not operate without either entire grass 
catcher or the discharge guard in place.

DO NOT operate in reverse unless absolutely 
necessary. ALWAYS look down and behind 
before and while backing; especially for 
children.

Содержание 915131 - 1334


























































Отзывы: