Ariens 915013-1742 EZR Скачать руководство пользователя страница 7

 

GB - 7

 

1. DANGER!

TO AVOID SERIOUS INJURY OR DEATH 

 

Read operator’s manual.

Keep children and others away from unit 
while operating.

Look down and behind before and while 
backing.

Never carry children, even if mower is 
disengaged.

Never direct discharge toward other people. 
Thrown objects can cause injury.

Go up and down slopes, not across. Do not 
operate on slopes that exceed 10°.

If machine stops going uphill, stop blade and 
back down slowly.

Avoid sudden turns.

Keep safety devices (guards, shields, switches, 
etc.) in place and working.

Check interlock system per manual before use.

Understand location and function of all controls.

Never allow operation by untrained persons.

 

2.  DANGER ROTATING PARTS 

 

Always keep feet and hands away from 
rotating parts.

Never direct discharge toward other people. 
Thrown objects can cause injury.

Keep people away from unit while 
operating.

Shut off engine, remove key, read manual 
before you adjust or repair unit.

NO STEP! Always keep feet away from 
rotating parts.

 

3.  WARNING - KEEP GUARDS IN PLACE 

 

Always stand clear of the discharge area 
when operating this unit.

Do not operate mower unless guards are in 
operating position or bagger is attached.

 

4. WARNING - FOR SAFE DECK REMOVAL

 

    Avoid injury from stored energy in lift assist spring.

Lift lever can spring up 
quickly if released while 
mower deck is removed. 
Do not unlock attachment 
lift lever when mower deck 
is removed. 

Before removing the 
mower deck, 

 

❶ 

 

lower the 

attachment lift lever to 
position 1, then 

 

 

 latch 

and lock the lock pin.

To properly latch and lock 
the lock pin.

 

 

 Pull the pin out of the 

latched unlocked position.

 

 

 Rotate the lock pin 

downward 90°.

 

 

 Push lock pin in to 

locked position.

 

5.  AVOID HOT SURFACES 

 

HOT SURFACES! DO NOT touch parts 
which are hot from operation. Always allow 
parts to cool.

 

SAFETY RULES

 

Operation

 

Read, understand, and follow all instructions in the 
manual and on the machine before starting:

How to operate all controls

OL1801

OL4140

OL4100

OL4110

OL4120

OL0910

OL4130

OL3030

OL0910

OL4140

OL4010

OL4420

OL4430

OL3320

OE0770

5
4
3
2
1

1

2

OE0780

1

2

3

OE0790

OS0732

Содержание 915013-1742 EZR



































Отзывы: