GB - 13
Install spacers on the wheel spindle above or
below the wheel support as shown. Turn the
spacers so the slot in the spacer does not
align with the flat on the wheel spindle.
Secure the spacers with the lock pin.
(Figure 7).
NOTE: Set both wheels at the same height
for a level cut.
Forward Drive Control (Lower Right
Hand Control)
NOTE: Engine must be running for wheel
drive to propel unit.
To drive forward:
Hold the parking brake lever against the
handlebar and slowly squeeze and hold the
forward drive control. Hold the forward drive
control against the handlebar for fastest
speed.
To stop:
Release forward drive control.
Figure 7
Align open end of the spacers
with the flat cut into the caster
fork. Remove the spacers from
the bottom of the stack.
Secure spacers above the
caster arm with the lock pin.
CAUTION: Unit will move at
engine start if the wheel drive
controls are engaged. ALWAYS
release the wheel drive controls
before starting unit.
STOP
GO
OM1240
Parking Brake
Lever
Forward Drive
Control
