GB - 22
If the drift cutters are installed, the snow thrower can be
placed in the storage position (figure 24). NEVER place
snow thrower in the storage position without the drift
cutters installed.
IMPORTANT:
NEVER spray unit with high-pressure
water. DO NOT store unit outdoors.
Clean plastic surfaces with sponge and mild detergent.
Dry with a soft cloth.
Remove all snow, ice, salt, dirt, grease, etc. from snow
thrower and unit.
Store in a clean, dry area.
Ensure all fasteners are properly tightened. Inspect
moving parts for damage and wear.
Touch up all rusted or chipped painted surfaces.
STORAGE
WARNING:
AVOID INJURY. Read and
understand the entire
Safety
section before
proceeding.
OEe030
Figure 24
Only place snow
thrower in the
Storage Position if
the drift cutters
are installed.
Storage Position
SPECIFICATIONS
Model
815034
Serial Number
> 101
Clearing Width with Drift Cutter – in. (m)
46 (1.16)
Clearing Width without Drift Cutter – in. (m)
42 (1.06)
