© ArianaSpas
www.arianaspas.com
21 |
P a g e
7. Common Malfunction & Troubleshooting Solutions
(1)
The equipment can't be started, and the buttons in its back are not lighting up?
A.
Make sure the power cord is plugged into a good power socket.
B.
Check whether the fuse tube is loose or burnt out.
(2)
The equipment can be started, but the RF doesn't output energy, or the energy is weakened?
A.
Please check whether the handpiece and the plug connecting to the equipment body are
closely linked.
B.
The wire inside is loose or burnt out.
(3)
The equipment doesn't have suction, or the suction is weak?
A.
Please turn off the equipment and check its specialized filter, which may need to be
replaced.
B.
Please check the rubber ring of the handpiece plug because a worn rubber ring may cause
air leakage.
C.
Please check whether the oil filter cup outside the filter is tightened and whether the rubber
ring is worn out. Air leakage in this place may cause insufficient air pressure.
D.
If the solutions mentioned above are not working, please contact the equipment dealer for
assistance.
(4)
The equipment can be started, but there is an error message on the monitor?
A.
Take out the plug in the back, wait for about 1 minute, re-plug it, and restart the
equipment.
B.
If the solutions mentioned above are not working, please contact the equipment dealer
for assistance.
