Ariafina CXW-310-MC121, Руководство по эксплуатации и установке

Страница: 39 / 49

38
Operation
CAUTION!
This hood has an automatic operation system (see
paragraph "Automatic operation (sensor)").
Calibration occurs automatically each time the hood is
reconnected to the power supply (e.g.: the first time the
hood is installed or after a power supply shutdown). It can
also be performed manually (see paragraph "
Manual
setting - Hood calibration ").
During calibration, which lasts for 5 minutes, the switch
buttons will flash and only the lighting button can be
operated.
Control panel with 7 buttons
To select the functions of the hood you simply touch the
controls.
Automatic operation (sensor)
Button ON/OFF lighting
Press briefly to switch on or off the lighting of
the hob.
Button for intensive speed
(suction power)
selection
Button for high speed (suction power)
selection.
Button for medium speed (suction power)
selection
Button for low speed
(suction power)
selection .
Button OFF motor
(stand by)
Indicators of Filter Saturation
At regular time intervals, the hood signals the need to
perform filter maintenance.
Button on with steady light: perform grease
filter maintenance.
Note: Filter saturation signal is visible within the first
minute after switching off the hood; within this time, the
reset of saturation indicators must be performed.
Reset of filter saturation indicators:
Press and hold the button
Automatic operation (sensor)
Attention!
The proper operation of the hood will depend on
the ’ Setting of parameters for Automatic Operation’ (see
dedicated section)
Note: Automatic operation with the hob is only possible with
specific hobs. For further details, please contact the official
dealer or authorised technical assistance centre.
Automatic operation (sensor)
Press the button . (the central LED lights
up in white).
The hood will switch on at the most suitable speed based
on the cooking fumes detected by the sensor on the hood.
Setting of parameters for Automatic Operation
Note: All calibration, selection, setting and logical
connection operations described below can be
performed with the hood off (OFF).
The adjustment of parameters is regularly done
automatically every time the hood is reconnected to
the mains (e.g. with the first installation or after a
blackout) or
manually .
Manual setting
To be performed when you notice unsatisfactory
functioning of the Automatic operation, and is done
when normal environmental conditions persist in the
kitchen.
Manual setting includes:
• Hood calibration
• Selection of hob (gas, induction, or electric)