manualshive.com logo in svg

Argus 145 Plus, Руководство пользователя, Страница: 259 / 361

Поделиться
Скачать
Argus 145 Plus Скачать руководство пользователя страница 259

14 Operation on an ISDN Access

ARGUS 145

 PLUS

259

14.4.5 B-channel loop

“B-channel loop” mode is required in order to run a bit error rate test using a loopbox (an 

ARGUS is the loopbox) at the remote end as well as testing leased lines.

The ARGUS - Main menu






Activate a “B-channel loop”

The ARGUS will wait for a call. Any 
incoming call (regardless of the service) 
will be taken immediately. The ARGUS will 
switch a loop back in the B-channel that is 
specified by the exchange and then send 
the recieved bit pattern back to the caller/
sender.

Display shown after taking a call:

<Menu>

Open the Main menu:

the “B-channel loop” remains active.

If you press 

<TM>

 (see page 297), 

the ARGUS will return to the "B-
channel Loop, wait active" display. 
From this menu, you can start a 
second B-channel loop connection 
(this is also possible using 

<TM>

).

<TM>

Opens the Test Manager (page 297)

Exit “B-channel Loop” mode

-

B-channel used and service 

-

The caller's number (from:) 

-

The number dialed (to:)

-

If available: TON, NP, UUS etc.

<TM>

Opens the Test Manager (page 297)

<Menu>

Open the Main menu.

Clear down the B-channel loop 
connection,

the B-channel loop, however, 
remains active!

Single Tests

Bit error rate test

B-channel loop

Содержание 145 Plus










































































































































































































































































































































































Отзывы:

Нет отзывов