background image

Warranty Policy

Argus Technologies Ltd. warrants all equipment manufactured by it to be free from defects in parts 

and labor, excluding third party OEM materials (example: air conditioners, batteries), for a period of 

two years from the date of shipment from the factory. For third party products the OEM’s warranty 

shall apply. The liability of Argus applies solely to repairing, replacing or issuing credit (at Argus’ sole 

discretion) for any equipment manufactured by it and returned by the customer during the warranty 

period. The terms of the warranty are Ex Works (EXW) from Argus’ factory service location.

 Argus reserves the right to void the warranty if:

 

(1)  identification marks or serial numbers are removed or altered in any way,

 

(2)  invoice is unpaid, or

 

(3)  defect is the result of misuse, neglect, improper installation, environmental 

 

 

conditions, non-authorized repair, alteration or accident.

Argus shall not be liable to the customer or other parties for any loss of profits, loss of use, costs for 

removal or installation of defective equipment, damages or consequential damages based upon 

equipment failure during or after the warranty period. There shall be no other obligations either 

expressed or implied. Argus will not honor warranties for batteries and other third party products 

without prior written Argus authorization.

Freight Policy

Customer is responsible for all shipping and handling charges (COD and freight collect will not be 

accepted without prior approval from Argus Technologies).

Terms of Payment (North America)

Payment terms are net 30 days subject to prior credit approval. All other orders require payment 

before shipping.

Terms of Payment (International)

Payment terms are subject to prior approval and are typically through Tele-Transfer.

Return Material Policy

Our RMA policy is designed to ensure prompt, efficient and high quality factory service. A Return  

Material Authorization (RMA) number must be obtained before products can be accepted for 

servicing by the Argus factory. For returns to an authorized service center (refer to “Authorized 

Service Centers” for locations), please consult the individual service center for specific return policies 

and instructions.

To obtain a RMA number for a factory return, customers must call the appropriate location with the 

product serial and model number, as well as a brief description of the problem, shipment instructions 

and billing details.

The original packing container should be used whenever possible. Both the shipping documents 

and the outside of the box must have the RMA # clearly marked and the product shipped prepaid to 

the Argus factory service center. Argus will endeavor to repair products within five working days of 

receipt. Repairs to the returned product are warranted for a period of six months. A service charge 

may be applied if no fault is found in the returned product. Argus will not accept products without an 

RMA number.

Business Hours

Argus North American office hours are 7:30 am to 5:00 pm (Pacific Standard Time) Monday to Friday. 

WARRANTY AND REPAIR INFORMATION

Canada and USA toll free 24 hour emergency technical support: +1 888 GO ARGUS (462 7487)  

Outside North America: +1 604 436 5547

Factory Service Centers

Canada and International

Argus Technologies Ltd.

ATTN: RMA Returns

7033 Antrim Avenue 

Burnaby, BC, V5J 4M5 Canada 

Tel: 

+1 604 436 5900

Fax: 

+1 604 436 1233

Email: 

[email protected]

USA

 

Argus Technologies Inc.

ATTN: RMA Returns

3116 Mercer Avenue

Bellingham, WA, 98225 USA 

Tel: 

+1-360 756 4904

Fax: 

+1-360 647 0498

Email: 

[email protected]

Asia-Pacific

PCM Electronics (Dong Guan) Co., Ltd.

Hongli Industrial Area, Miaobian, Liaobu Town, 

Dongguan City, Guangdong Province,  

523400 China 

Tel: 

+86 755 8895 3310

Fax: 

+86 755 8895 3307

Authorized Service Center

Argentina

Argus Technologies de Argentina

Belen 315, Capital Federal, Buenos Aires, 

1407l Argentina

Tel: 

+54 (11) 4672 4821

Fax: 

+54 (11) 4504 4698

Cell: 

+54 9 (11) 4993 9996

Email: 

[email protected]

Asia

Argus Technologies Asia Pte Ltd

Blk 6 Tagore Lane #160

Singapore 787570

Tel: 

+65 6458 8900

Fax: 

+65 6458 2122

Australia

CPS National

8/376 Newbridge Rd

Moorebank, NSW, 2170 Australia  

Tel: 

+61 02 9822 8977

Fax: 

+61 02 9822 8077

Australia/New Zealand

Alpha Power Systems Pty Ltd

Unit 3, 30 Heathcote Road 

Moorebank, NSW, 2170 Australia  

Tel: 

+61 02 9602 8331

Fax: 

+61 02 9602 9180

Century Yuasa

37 - 65 Colbalt Street

Carole Park QLD 4300

Australian Sales & Service

Tel: 

+61 07 3361 6587

Fax: 

+61 07 3361 6705

New Zealand Sales & Service 

Tel: 

+64 9 978 6689

Fax: 

+64 9 978 6677

Canada

Compower Systems Inc.

118 Tiffield Road 

Toronto, ON, M1V 5N2 Canada  

Tel: 

+1 416 293 3088

Fax: 

+1 416 293 0671

Europe

Alpha Technologies Europe Ltd.

Cartel Business Estate

Edinburgh Way

Harlow, Essex, CM20 2DU UK 

Tel: 

+44 1279 422110

Fax:  

+44 1279 423355

Mexico & Central America

Technologies Argus First De Mexico SA de CV

Anatole France No. 17

Col. Polanco

Mexico City, 11560 Mexico 

Tel: 

+52 55 5280 6990

Fax:  

+52 55 5280 6585

South America

Argus Technologies Argentina

Santo Tome 2573, Capital Federal

Buenos Aires, 1416 Argentina

Tel: 

+54 11 4504 4698

Cell: 

+54 9 11 4993 9996

E-pager:  [email protected]

Turkey

IPC Enerji Elk San ve TIC AS

Inonu cad. Kanarya sok. No:20

Yenisahra - Kadikoy

Istanbul, Turkey

Tel: 

+90 216 317 41 42

Fax: 

+90 216 472 90 66

048-507-10-I1 Rev S (09/2007)

Содержание 010-523-B2

































Отзывы: