Argox AS-8000 Series, Инструкция по эксплуатации

Страница: 12 / 134

7
4. Push the “Reset” button on the bottom of cradle – If
the cradle is linked with an imager and in range,
pushing the “Reset” button (for about 2 seconds) on the
bottom of cradle will drop the link between the devices.
If the button is pushed while the imager is out of range,
the cradle will unlink and make itself available to other
imagers. The scanner will not drop its link with the
cradle automatically, but can be linked to any other
cradle by reading its link label.
* Note : If just push the button with a short time (less than one
second), a “Paging” feature will be performed to page the
imager which was linked with the cradle.