Argos Yanniek 459/7344 Скачать руководство пользователя страница 2

1

Note:

 if required the next 

page can be cut out and used 

as reference throughout the 

assembly. Keep this page with 

these instructions for future 

reference.

• Assemble all parts and bolts 

loosely during assembly, only 

once the product is complete 

should you fully tighten the bolts

• Regularly check and ensure 

that all bolts and fi ttings are 

tightend properly.

Handy Hints

• Only clean using a damp cloth

and mild detergent, do no use 

bleach or abrasive cleaners. 

• From time to time check that

there are no loose screws on 

this unit. 

• This product should not be 

discarded with household waste. 

Take to your local authority 

waste disposal centre. 

Care and maintenance

Skin contact: 

Remove 

contamination by washing with 

soap and water. This procedure 

should also be followed prior to 

eating and drinking. 

Eye contact: 

Rinse immediately 

with clean water for 15 minutes 

and seek medical advice.

 

If swallowed: 

Seek medical 

advice immediately.

Glue safety 

- Take care when using glue, please follow the advice below•

Important 

– Please read these instructions fully before starting assembly

•  During assembly do not stand 

or put weight on the product, 

this could cause damage.

• Assemble the item as close 

to its final position (in the same 

room) as possible.

• Assemble on a soft level 

surface to avoid damaging the 

unit or your floor.

• Parts of the assembly will be 

easier with 2 people.

• Check you have all the 

components and tools listed 

on the following pages.

• Remove all fittings from the 

plastic bags and separate them 

into their groups.

• Keep children and animals 

away from the work area, small 

parts could choke if swallowed.

• Make sure you have enough 

space to layout the parts before 

starting.

 

• To reduce 

 

the likelihood of 

 

damaging your 

 

product please 

 

ensure that your 

power drill is set on a low torque 

setting.

• Assembly should be carried out

by a competent adult only.

• do not use this item if any 

components are missing

or damaged.

• this item is suitable for childeren

from  the age of 6.

Safety and Care Advice 

Содержание Yanniek 459/7344

















Отзывы: