J
Assembly Instructions
10
Step
13
Fit doors and handles
Note:
The easiest way to
attach each door is
to fit the top hinge first,
then align and fit the
other hinges.
a:
Push the hinge
onto the front part of the
hinge plate .
The recess at the bottom
of screw B goes into the
slot in the hinge plate.
b:
Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The hinge must be
flat against the hinge
plate prior to any
adjustment.
d:
The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
hinge plate and the hinge
would not be secure.
Remove the hinge from
the hinge plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a handle
to each door using 2
screws .
H
H
H
G
G
G
H
G
6
6
e:
J
K
a:
b:
c:
d:
G
H
G
G
B
G
H
H
H
A
H
G
B
6
6
K
K
J
