
10
Maintenance
Cleaning the pre motor filter
9
Replacing the belt
1. Remove the pre motor filter from
underneath the dirt container.
2. Clean the pre motor filter by
tapping it against a bin and
washing it under warm water
(max 40˚C).
3. Leave to dry for 24 hours before
returning to your machine and
using your vacuum cleaner.
1. Remove the 4 screws on the base
of the unit.
2. Remove the 2 screws underneath
the middle set of wheels.
3. Lift the floor head cover.
4. Remove the belt from the unit, by
lifting out the brushbar. Replace
the belt and fit the brushbar back
into the floor head.
1
2
2
1
3
TAP
Emptying the dirt container
Assembly
Maintenance
WARNING:
To reduce the risk of electric shock,
turn the vacuum cleaner off and unplug from the
electrical outlet before performing maintenance/
trouble shooting checks.
NOTE:
Empty the dirt container
regularly. When maximum dust
capacity is reached it is necessary to
empty/clean the dirt container.
1. Remove the dirt container, lifting
the release handle.
2. Empty the dirt container over a bin
by pressing the dirt release button.
NOTE:
Failure to keep filters clean will
result in a loss of performance.
1. Remove lid of dirt container by
twisting anti clockwise.
NOTE:
To remove/attach the lid to the
dust container align arrows.
2. Remove the HEPA media filter by
twisting anti clockwise.
3. Clean the HEPA media filter
by tapping it against a bin and
washing it under warm water
(max 40°C).
4. Leave the filter to dry for 24 hours,
before returning to the dirt bin and
using your machine.
1
2
3
2
1
Cleaning the HEPA media filter
a
b
a
b
TAP