background image

Safety and Care Advice 

Important

 

– Please read these instructions fully before starting assembly

 

 

  Check you have all the 

components and tools listed on 

page 2 & 3. 

  Remove all fittings from the 

plastic bags and separate them 

into their groups.

 

  Keep children and animals 

away from the work area, small 

parts could choke if swallowed. 

  Make sure you have enough 

space to layout the parts before 

starting.

 

  Do not stand or put weight on 

the product, this could cause 

damage.

 

  Assemble the item as close to 

its final position (in the same 

room) as possible.

 

  Assemble on a soft level 

surface to avoid damaging the 

unit or your floor.

 

 

  We do not 

recommend the use of 

power drill/drivers

 

for 

inserting screws,

 

as 

this could damage the unit. Only 

use hand screwdrivers.

 

  Dispose of all packaging carefully 

and responsibly.

 

 

 

Care and maintenance 

  Only clean using a damp 

cloth and mild detergent, do 

not use bleach or abrasive 

cleaners.

 

 

  From time to time check that 

there are no loose screws on this 

unit.

 

 

  This product should not be 

discarded with household waste. 

Take to your local authority 

waste disposal centre.

 

 

 

Содержание Twister CD/DVD tower











Отзывы: