Assembly Instructions
Step 2
Assemble Cornice
a:
Work on a fl at clean
surface . Position the RH
cornice return
4
and
the cornice front section
2
together to make a
corner and press the
20mm dovetail jointer
A
curved edge fi rst into
the deepest slot made
by the two sections and
the 9mm dovetail
B
into
the shallowest. Tap home
fi rmly with a hammer to
make the joint tight.
Repeat for the other joint.
b:
Place the cornice
on top of the wardrobe,
you may need to use
step ladders to do this.
position the cornice being
careful to ensure that
the back edges of the
cornhice are fl ush with
the back of the robe and
that the overhang on
each side is equal. Once
the position is correct,
screw down fi rmly with a
philips screwdriver and
the 20mm cornice screws
C
.
Note:
There are not any
pre drilled holes in the
top of the robes for this.
4
2
A
1
C
5
a:
b:
Small hammer
2
4
3
Philips screwdriver
WARNING:
Help may be
required for this step.
B
