Argos StarFire XT, Руководство оператора

Страница: 15 / 104

14
Argos Technologies StarFire XT — Operator’s Manual
English
Menu Functions
(cont.)
Press the MENU BUTTON to change the duration of the flame (between 1 second and
60 minutes). Rotate the knob to the desired time and press to confirm. While ignited, the
timer on the LCD display will countdown the remaining time.
Parameter Description Range
Basic
Setting
Specifying the
burning time of the
flame
1 sec –
60 min
10 s
The flame can be also be extinguished at any time by activating the SENSOR once or
pressing the MENU KNOB.
Sensor OFF switch
If desired, the sensor can be manually switched off to prevent accidental ignition.
The switch can be found on the underside of StarFire XT (see “Bottom View” on
page 8). When this is switched to “0” the LCD will display “OFF” where the timer would
normally be.
Foot Switch Operating Mode
In the FOOTSWITCH operating mode, when the timer is set to “off ” (Default setting)
the flame can only be ignited by depressing the footswitch. To extinguish the flame
release the footswitch.
StarFire XT can also be set so that the footswitch will ignite the flame for a pre-defined
time. In FOOTSWITCH mode, press the MENU BUTTON to highlight the timer.
Rotate the MENU KNOB to set the time (between 1 second and 60 minutes). Press
the MENU KNOB to select the desired flame time. Actuate the footswitch to ignite
the flame. The LCD display will show the remaining flame time. The flame can also be
extinguished at any time by actuating the footswitch again, or by pushing the MENU
BUTTON.
Parameter Description Range
Basic
Setting
Flame is ignited
by depressing
footswitch
– Off
Setting the burning
time of the flame 1 sec –
60 min
Off