6
STARTING
Rthese
These operations should be repeated a few times before starting work to make sure
that everything is functioning properly and to familiarize yourself with the string trimmer.
Start off slowly. When you have gained experience, you will be able to use the grass
trimmer to its full potential.
4. The length of the grass trimmer handle can be infinitely varied and therefore adjusted to
your individual height (Figure 7):
(1). Hold the tube with one hand; then loosen the
adjusting bolt. (2).Set the handle to the correct length and tighten the adjusting bolt.
Figure 7
REPLACE THE SPOOL OF NYLON LINE
1. Remove the battery.
2.
Remove the spool assembly from the trimmer. To do so, hold the outer ribbed part of the
assembly with one hand, while pushing down and turning the spool head with the other to unlock
it (Figure 8). The spool carrier and spool will now disassemble easily.
1. When starting the lawn trimmer for the first time,
check that the nylon lines touch or pass over the
wire cutting blade. If they are not long enough, (1).
press the button
(2).pull more nylon wire to
lengthen.(Figure 5)
2. The lengthened nylon line will be cut to size
automatically by the wire cutting blade once the
string trimmer is turned on.
3. During use, the nylon line will become shortened or
worn. To automatically lengthen or advance the
nylon cutting line, tap the spool button lightly on
ground (while the unit is running).(Figure 6)
Figure 5
Figure 6