Finished
front edge
Finished
front edge
Finished
front edge
Assembly Instructions
8
4
plain chipboar
d surface
Step
9
Prepare the 2 base
panels
Insert 4 large locking
nuts into each of the
2 bases .
Note:
The arrow on the
locking nut
must
point
towards the hole in the
edge of the panel.
Note:
The 2 base panels are slightly
larger than the top (refer to panels page)
D
4
Fit the 2 base panels
to the right side
Push the 2 bases
onto the right side .
Use a screwdriver to
tighten the 2 large
locking nuts fitted to
each base .
Note:
Turn the large
locking nuts as far
as they will go - more
than 1/2 a turn.
4
D
Step
10
4
2
D
Step
11
D
4
B
D
2
D
D
D
D
Finished
front edge
4
Prepare the top
Insert 4 large locking
nuts into the top .
D
3
Finished
front edge
plain chipboar
d surface
D
D
D
D
3
plain chipboar
d surface
plain chipboar
d surface
x 2
