Safety and Care Advice
important - Please read these instructions fully before starting assembly
• Assemble on a soft level surface to avoid damaging the sofa or your floor.
• Parts of the assembly will be easier with 2 people.
With clean movements bring
the back cushions of the chair
back to their original shape.
Spread the leather evenly across
the seat cushions with the palms
of your hands
Give the arm pads a good plump
and then straighten them as
shown.
Before your furniture leaves the factory, it is given a final inspection prior to secure wrapping for
distribution. Due to tight and secure wrapping to minimise movement during transit, when unwrapped, the
chair may appear a little "distressed". This is entirely normal, and the illustrations below show how to
rectify this in 3 easy steps:
Step 1
Step 2
• Make sure you have enough space to work and layout the sofa.
• Assemble the sofa as close to its final position (in the same room) as possible.
Step 3
• Remove the protective cellophane wrapping the sofa. Do not use sharp tools that may damage the sofa
covering.
• Feet and accessories can be found by opening the zip underneath the sofa. To access this zip spread
the cellophane sheet on the floor, lower the sofa so that the rear back panel rests against the floor.
Remove package containing the feet and accessories, then install the feet.
• Once feet are securely attached return the sofa to an upright position. To do this the sofa must be lifted
and turned. Avoid using the feet as a lever as doing this may lead to damage.
• Dispose of all packaging carefully and responsibly.
Issue 3 - 23-05-2018
