background image

Assembly Instructions

15

Step

 

25

Fit the doors

Note:

 The easiest way to 

attach each door       and      

.     is to fit the top hinge 

first, then align and fit the 

other hinge. 

a:

 

Push the hinge     

onto the front part of the 

hinge plate     .

The recess at the bottom 

of screw B goes into the 

slot in the hinge plate.   

b:

 

Keep the hinge   

FLAT against the hinge 

plate      as you slide it 

across as far as it will go.

Tighten screw A.

c:

 

The hinge      must be 

flat against the hinge 

plate      prior to any

adjustment.

d:

 

The hinge      must 

NOT be AT AN ANGLE 

to the hinge plate      

when assembled.

This would indicate that 

the recess at the bottom 

of screw B had not 

located in the slot in the 

hinge plate and the hinge 

would not be secure.

Remove the hinge from 

the hinge plate and then 

re-assemble being 

careful to follow

instructions a-c.

e:

 

Push the remaining 

shelf stud      down into 

the hole in the base      .     

to act as a door stop. 

N

N

N

M

M

M

N

M

16

17

a:

b:

c:

d:

M

N

M

M

B

M

N

N

N

A

N

M

B

16

17

e:

R

R

12

12

Содержание Retro Pedestal 343/7395





















Отзывы: