fig. 4
Assembly Instructions
Assembly Instructions
Stage 2 –
Fitting the Back Cushions
Stage 1 –
2.
NOTE: It would be useful to ask
someone to help you at this
stage.
NOTE: It would be useful to ask
someone to help you at this
stage.
Attach the Left B , Centre C
and Right Back Cushions D
Then engage the metal locks and
push them together until you hear
them lock into position.
NOTE: Carefully line up the
Ensure they align
correctly.
Metal Lock
B
C
See fig.4.
to the seat unit .
two side metal locks.
Fit the velcro cover on
the back cushions onto the
velcro of the seat unit.
fig. 5
NOTE: You can ensure the Back
together by adjusting the
Cushions are closely joined
metal frame as show in fig. 5.
Step 1 ( Fig. 1)
- Carefully tilt back the seat
unit onto it's back.
Transit Packing With a spaner
and dispose of it(See Fig 2).
See fig.2.
Fig. 1
Fig.2
Step 2 ( Fig. 2)
See fig.1.
This is not required for any other use.
D
A
Remove the Wooden Frame
1.
between two seat.
EPE
-Remove the EPE from the gap
-Get the fitting bag from Bracket Rear.
spaner
Preparing the Seat Unit
A
